There are many industries where austenitic stainless steel needs to be welded specially in power generation industries. Unfortunately the austenitic stainless welding has several fabrication and metallurgical drawbacks when welded by using conventional fusion welding methods, which can often leads to in-service failure. The most pronounced fabrication faults are hot cracks due to inadvertent us...

Ultrasonic peening treatment (UPT) as a method of severe plastic deformation was used to treat cruciform welded joints of Q345 steel. The application of UPT achieves material surface nanocrystallization of the peening zone, reduces stress concentration, and produces residual compressive stresses at the welded toe. Micro-structure, hardness, stress relief, S-N curve, and the fatigue fracture mec...

The reliability of welded structure can be evaluated through welding residual stress analysis and fatigue strength assessment. In this study, welding residual stresses of multi-pass dissimilar material welded joint between alloy 617 and 12Cr steel were analyzed numerically and experimentally. Fatigue strength was then assessed in the air. Based on results of welding residual stress analysis and...

1.1 Offshore Structures: Offshore structures used for oil and gas extraction have the common function of providing a safe, dry working environment for the equipment and persons those operates the platform. Jacket supported drilling equipment as a guide for the piled foundations. The substructure referred to as the jacket is a three dimensional space frame made from large tubular steel members. ...

 In this study, high-carbon, chromium alloy steel (100Cr6) having the initial spheroidized microstructure was welded using the rotary friction welding method. The effects of process parameters such as friction time and friction force were experimentally investigated. The friction welded joints were produced of two 100Cr6 steel rods. In order to examine the microstructure and mechanical properti...

background: one of the methods used for joining metals together is welding, which can be carried out using different techniques such as electric spot welding. this study evaluated the effect of electric spot welding on the load defl ection rate of stainless steel and chromium-cobalt orthodontic wires. materials and methods: in this experimental-laboratory study, load defl ection rate of 0.016 ×...

During the weld defect detection, the heat transfer characteristics are closely related to the material properties of welded structure. Based on the electromagnetic induction infrared thermography technology, the heat transfer Characteristics of the welded material are studied with the changing temperature. By using the finite element analysis software COMSOL, the eddy current density and tempe...

The advancement of transmission electron microscopy has made it possible to analyze the metallographic structure of steel products on a nanoscopic scale, which leads to the detail understanding of microstructures such as fine precipitates and grain boundaries. The application of the characteristic technology to commercial steel products requires consistency in the structural analysis of steel f...

I. Sărăcin University of Craiova, Faculty of Agriculture, Romania. G. Paraschiv, Polytechnic University of Bucharest, Romania. O. Pandia, I Bozgă, D. Toma University of Agricultural Sciences and Veterinary Medicine Bucharest, Romania Welded construction equipments for agriculture are strongly stressed in terms of mechanics, but also in terms of environmental action and thus in many cases appear...

V. Lazić, D. Arsić, S. Aleksandrović, A. Ilić, L. Ivanović, M. Djordjević, Faculty of Engineering, University of Kragujevac, Kragujevac, Serbia A. Sedmak, Faculty of Mechanical Engineering, University of Belgrade, Belgrade, Serbia This paper presents the analysis of the influence of temperature on mechanic properties of the base material and welded joints made of high strength steel. The joints...